360a Series Label Applicator Integrated Loose Loop

| March 29, 2016

CTM Labeling 360aThe 360a Series Label Applicator evolved from the industry standard 360 Series Platform. The 360a can be configured as a merge, blow-on or tamp-blow applicator, 5″, 7.5″ or 10″ widths and each module can also be easily switched to the opposite hand with few or no change parts in a minimum amount of time. All units are stepper motor driven to include State-of-the-art electronics and a “Self-teaching” label sensor. File encryption of the 360a allows for easy “on-site” software revisions and upgrades.

Specifications 

  • Series   360a
  • Voltage   120 VAC
    240 VAC Available
  • Current   5 amps
  • Frequency   50/60 Hz
  • Phase   Single
  • Air Consumption @ 60-90 psi.   Up to 4 CFM
  • Label Placement   ± 1/32 in
  • Air Blow Width   28 in
  • Air Blow Height   24 in
  • Air Blow Depth   27 1/2 in
  • Merge Width   29 in
  • Merge Height   25 in
  • Merge Depth   27 1/2 in
  • Tamp Width   28 in
  • Tamp Height   22 1/2 in
  • Tamp Depth   27 1/2 in
  • Product Sensing   Retroreflective scanner provided as standard, other types available

Label Sizes 

  • Min. Air Blow (W x L)   3/4 x 3/4 in
  • Max. Air Blow (W x L)   7.5 x 9 in
  • Min. Merge (W x L)   3/4 x 3/4 in
  • Max. Merge (W x L)   10 x 20 in
  • Min. Tamp (W x L)   3/4 x 3/4 in
  • Max. Tamp (W x L)   10 x 10 in

Label Roll Size

  • Max. OD Core   12 in
  • Max. ID Core   3 in
  • Optional   16″ OD or 20″ OD x 3″ or 6″ ID cores

Stepper Motor 
The 360 stepper drive uses a micro pulse driver for increased accuracy and performance, and is programmable to dispense labels at up to 3000 inches per minute.

Control 
The 360a features a combined power supply, amplifier and position controller to comprise a single drive package. The new single axis digital stepper / servo controller controls up to five tasks simultaneously plus management of variables with expanded I/O making this drive well-suited for the most demanding production applications. The 360a controller is also equipped with onboard I/O prewired to external connectors to accommodate the following:

  • low label – single, double or triple lightstack
  • web break – encoder velocity compensation
  • loose loop control – product shape profiling
  • imprinting – zero downtime configuration

Each machine is shipped preprogrammed and can have the additional hardware installed at a later date for simple “plug n play” operations. The electronic control assembly is packaged as a module and can be easily removed for repair or replacement, eliminating costly downtime and servicing.

Operator Interface 
The 6″, 256 color, TFT touch screen operator interface provides a bold, bright, high contrast display with self-diagnostic platforms and multi-level intuitive set-up features.

Labeling Speeds 
Programmable to 3000 inches per minute with secondary unwind and vacuum takeaway. Programmed with speed profiling ability.

CTM Labeling logoCall us (330) 332-1800
www.ctmlabelingsystems.com

Print Friendly

Tags:

Category: Featured Products